Thermal shock chambers engineering Thermal shock test chamber
is divided into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.
The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.
High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.
Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
Both 2 zone and 3 zone shocks can be chosen.
All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.
Machine can be shut down automatically in case of electrical power instabilities.
|Interal Dimension:||(W×H×D)40×36×35 cm|
|Structure:||Two chambers design(the hot chamber or the cold chamber)|
|Damper device:||Forced air drived damper|
|Interior material:||SUS# Stainless steel plate|
|Exterior material:||SUS# Stainless steel plate|
|Basket material:||SUS# Stainless steel plate|
|Refrigeration:||Cascade refrigeration system|
|Preheating temperature:||above freezing 60.00°C~above freezing200.00°C|
|Precooling temperature:||subzero 10.00°~ subzero 70.00°C|
|H.T. Shocking:||above freezing 60.00°C~above freezing 150.00°C|
|L.T. Shocking:||subzero 10.00°C~subzero 65.00°C|
|Simulated load ic||5.0kg|
|HT IN-Zone||subzero 65.00°C~above freezing 150.00°C/5min|
|LT IN-Zone||above freezing 150.00°C subzero 65.00°C|
|Setting range:||Temperature:subzero 100.00°C~above freezing 200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999|
|Output mode:||PID and SSR(control method)|
|Power(K.W)||AC380V 50HZ 18KW|