High Temperature Test Chamber
Internal Dimension：standard or customized.
General Details
High Temperature Test Chamber
- This chamber is designed for drying, aging and heat treatment for non-flammable, non-explosive materials to do high temperature test, and test for components in Electronics, electrical, instrument fields.
- Handles, hinges, touch screen controllers and seals are all made of high-quality, high-reliability materials and are very durable.
- The customized High Temperature Test Chamber is available for us.
Parameters
| Product Name | High temperature test chamber | |||||||||||
| Model | WG3001 | WG3002 | WG3005 | WG301 | WG302 | WG4502 | WG4506 | WG451 | WG6002 | WG6006 | WG601 | |
| Performance | Temp. Range | RT+20～＋300℃ | RT+20～＋450℃ | RT+50～＋600℃ | ||||||||
| Temp.Fluctuations | ≤1℃（≤±0.5℃，Expressed according to GB/T5170-1996） | ≤1℃ | ≤±1℃ | |||||||||
| Temp. Uniformity | ≤2℃（RT+20℃～＋200℃，150mm away from the inner wall test） WG302 Type ≤2℃（RT+20℃～＋200℃，200mm away from the inner wall test） |
≤2℃（RT+20℃～＋200℃，150mm away from the inner wall test）
≤10℃（200℃≤T≤400℃） |
≤±8℃ （RT~550℃，150mm away from the inner wall for distribution test） | |||||||||
| Temperature Deviations | ±2℃（RT+20℃～＋200℃） | |||||||||||
| Specification | Working Room Dimensions（mm） | 450×450×450 | 600×600×600 | 800×800×800 | 1000×1000×1000 | 1200×1300×1300 | 500×600×700 | 800×800×1000 | 1000×1000×1000 | 600×600×600 | 800×800×1000 | 1000×1000×1000 |
| Outer Dimensions Around（mm） | 635×1040×820 | 790×1200×1000 | 1100×1500×1200 | 1300×1750×1500 | 1500×2050×1900 | 800×1450×1350 | 1150×1750×1750 | 1450×1750×1780 | 1100×1500×1650 | 1300×1800×1850 | 1500×2000×2050 | |
| Content Volume | 91L | 216L | 512L | 1000L | 2028L | 210L | 640L | 1000L | 216L | 640L | 1000L | |
| Power（KW） | 1.5KW | 2.9KW | 6.4KW | 9.9KW | 15.9KW | 6.5KW | 13KW | 16KW | 12.5KW | 18.5KW | 21.5KW | |
| Power Supply | AC220V±10%，50Hz±1Single-phase + grounding wire, protective grounding resistance is less than 4Ω | 380V±10%，50Hz±1. Three-phase four-wire + grounding wire, protective grounding resistance is less than 4Ω | ||||||||||
| Shelf | 2 adjustable shelves | |||||||||||
| Disposition | Structural | Integral, three-duct structure forms a horizontal transverse wind flow，so that he surface of the sample is heated evenly | ||||||||||
| Exterior Material | Cold-rolled steel plate with electrostatic double-sided spraying. | |||||||||||
| Internal Material | High quality stainless steel plate | |||||||||||
| Heater | Nichrome electric heater | |||||||||||
| Actuators | Solid state relays | |||||||||||
| Insulation | 100mm Fiberglass | 150mm aluminum silicate | 200mm aluminum silicate | |||||||||
| Door Seal | Silicone rubber seals | Ceramic fiber sealing strips | Ceramic fiber sealing strips | |||||||||
| Controller | High-precision temperature controller, the controller adopts digital display, which can display and set test parameters | |||||||||||
| Safety Devices | Heater short circuit, working room over-temperature protection, blower motor overheat etc., improve the safety of use | |||||||||||
| Remarks | The inner and outer dimensions are marked as：D×W×H；
Recommended conditions for device use：Ambient temperature 5℃～＋30℃，Ambient humidity：≤85%RH； The above data are measured under no-load conditions. |
|||||||||||
Advantages
1.24 years testing equipment manufacturer.
2. Low wholesale price.
3. Small MOQ is available.
4. One-stop testing solution provider.
5. ISO9001:2015/ISO14001:2015 certificated factory.
Our Services
1.12 months warranty.
2. 24-hour online service.
3. Product pictures could be offered before delivery.
4. Products performance will be tested before shipping.
5. Permanent technical support.
Packing & Delivery
Plastic film entwined, then put into a carton, which can meet the export standard.
Technical Information
Order Inquiry