High Temperature Test Chamber
A variety of internal volumes and temperature ranges for you to choose from, and customization is also supported
High Temperature Test Chamber Uses
High temperature test chamber is an essential test equipment in the fields of aviation, automobile, home appliances, scientific research, etc. It is used to test and determine the parameters and performance of electrical, electronic and other products and materials after high temperature or constant temperature environment changes.
High Temperature Test Chamber Features
1. Outer material: All are made of high-quality steel plate CNC processing, and the outer shell surface is sprayed with plastic, which is more smooth and beautiful.
2. Inner material: stainless steel.
3. Insulation material: fiberglass.
4. A variety of internal volumes and temperature ranges for you to choose from, and customization is also supported.
High Temperature Test Chamber Parameters
| Product Name | High temperature test chamber | |||||||||||
| Model | WG3001 | WG3002 | WG3005 | WG301 | WG302 | WG4502 | WG4506 | WG451 | WG6002 | WG6006 | WG601 | |
| Performance | Temp. Range | RT+20～＋300℃ | RT+20～＋450℃ | RT+50～＋600℃ | ||||||||
| Temp.Fluctuations | ≤1℃（≤±0.5℃，Expressed according to GB/T5170-1996） | ≤1℃ | ≤±1℃ | |||||||||
| Temp. Uniformity | ≤2℃（RT+20℃～＋200℃，150mm away from the inner wall test） WG302 Type ≤2℃（RT+20℃～＋200℃，200mm away from the inner wall test） |
≤2℃（RT+20℃～＋200℃，150mm away from the inner wall test）
≤10℃（200℃≤T≤400℃） |
≤±8℃ （RT~550℃，150mm away from the inner wall for distribution test） | |||||||||
| Temperature Deviations | ±2℃（RT+20℃～＋200℃） | |||||||||||
| Specification | Working Room Dimensions（mm） | 450×450×450 | 600×600×600 | 800×800×800 | 1000×1000×1000 | 1200×1300×1300 | 500×600×700 | 800×800×1000 | 1000×1000×1000 | 600×600×600 | 800×800×1000 | 1000×1000×1000 |
| Outer Dimensions Around（mm） | 635×1040×820 | 790×1200×1000 | 1100×1500×1200 | 1300×1750×1500 | 1500×2050×1900 | 800×1450×1350 | 1150×1750×1750 | 1450×1750×1780 | 1100×1500×1650 | 1300×1800×1850 | 1500×2000×2050 | |
| Content Volume | 91L | 216L | 512L | 1000L | 2028L | 210L | 640L | 1000L | 216L | 640L | 1000L | |
| Power（KW） | 1.5KW | 2.9KW | 6.4KW | 9.9KW | 15.9KW | 6.5KW | 13KW | 16KW | 12.5KW | 18.5KW | 21.5KW | |
| Power Supply | AC220V±10%，50Hz±1Single-phase + grounding wire, protective grounding resistance is less than 4Ω | 380V±10%，50Hz±1. Three-phase four-wire + grounding wire, protective grounding resistance is less than 4Ω | ||||||||||
| Shelf | 2 adjustable shelves | |||||||||||
| Disposition | Structural | Integral, three-duct structure forms a horizontal transverse wind flow，so that he surface of the sample is heated evenly | ||||||||||
| Exterior Material | Cold-rolled steel plate with electrostatic double-sided spraying. | |||||||||||
| Internal Material | High quality stainless steel plate | |||||||||||
| Heater | Nichrome electric heater | |||||||||||
| Actuators | Solid state relays | |||||||||||
| Insulation | 100mm Fiberglass | 150mm aluminum silicate | 200mm aluminum silicate | |||||||||
| Door Seal | Silicone rubber seals | Ceramic fiber sealing strips | Ceramic fiber sealing strips | |||||||||
| Controller | High-precision temperature controller, the controller adopts digital display, which can display and set test parameters | |||||||||||
| Safety Devices | Heater short circuit, working room over-temperature protection, blower motor overheat etc., improve the safety of use | |||||||||||
| Remarks | The inner and outer dimensions are marked as：D×W×H；
Recommended conditions for device use：Ambient temperature 5℃～＋30℃，Ambient humidity：≤85%RH； The above data are measured under no-load conditions. |
|||||||||||
High Temperature Test Chamber Advantages
1. 24 years testing equipment manufacturer.
2. Low wholesale price.
3. Small MOQ is available.
4. One-stop testing solution provider.
5. ISO9001:2015/ISO14001:2015 certificated factory.
Our Services
1. 12 months warranty.
2. 24-hour online service.
3. Product pictures could be offered before delivery.
4. Products performance will be tested before shipping.
5. Permanent technical support.
Packing & Delivery
Plastic film entwined, then put into a carton, which can meet the export standard.
Electrothermal Incubators
Temperature Range: 4～50℃; Internal volume: 25-250L;
Medicine Stability Testing Chamber
Temperature range: + 10 ~ + 75 ℃; Humidity range: 15% to 95%； Internal dimensions: 192L ~ 401L；