constant temperature aging chamber
Certification: ISO. MOQ: 1 set.
General Details
Constant temperature aging chamber details
| Type I laminar flow Air thermal aging test chamber | Type II laminar flow Air thermal aging test chamber | ||||||
| Model | LR02B-I | LR05B-I | LR1B-I | LR02B-II | LR05B-II | LR1B-II | |
| Performance | Temp. Range | R.T+20℃～+300℃ | |||||
| Temp.Fluctuations | ≤1℃（≤±0.5℃，Expressed according to GB/T5170-1996） | ||||||
| Temp. Uniformity | ≤±2℃（RT+20℃～＋200℃，100mm away from the inner wall test） | ≤2℃（RT+20℃～＋200℃，150mm away from the inner wall test） | |||||
| Temperature deviations | ±2℃（RT+20℃～＋200℃） | ||||||
| Ventilation function | Ventilation velocity：0.5m/S ~1.5m/S （GBT 3512-2014） | Adjustable ventilation function：The front side of the aging box is equipped with an air intake adjustment switch，The air change volume can be manually adjusted for 3~11 times/H，The number of air changes cannot be displayed。 | |||||
| Ventilation and air change：The ventilation volume is 3~10 times/hour and can be adjusted manually（The number of air changes is not displayed），It is equipped with air inlet and exhaust vent | Forced ventilation function：It can be equipped with timed and forced ventilation functions。（Optional features）
The maximum air exchange rate is about 100 times/h~200 times/h，The air change volume can be adjusted manually, and the number of air changes cannot be displayed. |
||||||
| Specification | Working Room Dimensions（mm） | 600×600×600 | 800×800×800 | 1000×1000×1000 | 600×600×600 | 800×800×800 | 1000×1000×1000 |
| Outer Dimensions Around（mm） | 790×1200×1100 | 1030×1300×1600 | 1230×1600×1800 | 790×1200×1000 | 990×1400×1200 | 1290×1600×1600 | |
| Content Volume | 216L | 512L | 1000L | 216L | 512L | 1000L | |
| Power（KW） | 6.3KW | 6.9KW | 9.9KW | 6.9KW | 9.9KW | 12.9KW | |
| Power Supply | AC380V±10%，50Hz±1, Three-phase four-wire + grounding wire, protective grounding resistance is less than 4Ω | ||||||
| Shelf | 2 stainless steel shelves | ||||||
| Turntable | / | Optional turntable，The speed is 1~2 R/min（Optional features） | |||||
| Disposition | Structural | Integral, the control panel is placed on the front of the equipment. | |||||
| Exterior Material | Cold-rolled steel plate with electrostatic double-sided spraying. | ||||||
| Internal Material | High quality stainless steel plate | ||||||
| Insulation | Fiberglass | ||||||
| Heater | Nichrome electric heater | ||||||
| Actuators | Solid state relays | ||||||
| Safety Devices | Heater short circuit, working room over-temperature protection, blower motor overheat, etc., improve the safety of use | ||||||
| Remarks | The inner and outer dimensions are marked as：D×W×H；
Recommended conditions for device use：Ambient temperature 5℃～＋30℃，Ambient humidity：≤85%RH； The above data are measured under no-load conditions. |
||||||
Technical Information
Uses
Electronic products pipeline aging process
Features
- Belt feed, improve production efficiency.
- All operating status displayed in front and back sides simultaneously.
- Automatic stop function to prevent wrong operation.
- In terms of security, equipped with automatic overheat prevention, over-preventive device, over current electric leakage protection, and other security measures.
Order Enquiry